Creating And Using Hierarchical Directories; Example Hierarchy; Changing The Default Volume - HP 9000 200 Series Manual

Creating and Using Hierarchical Directories
Directories contain information about files on a volume. If you are on a hierarchical-
directory volume (such as HFS or SRM), directories also have additional capabilities.
This section shows how to create and access hierarchical directories.
Exampie Hierarchy
Examples in the following paragraphs refer to the directory structure shown
III
the
illustration below.
(root)
assignments assignments
schedule
schedule
budget budget
The boxed names signify directories, while the unenclosed names signify files.
Changing the Default Volume
First, it will be helpful to change the default volume to the "root" directory of your
hierarchical volume by executing something like this:
MSI ": .700" or
MS I ":. 21 . 0"
You do not need to specify a
"I",
since the directory path is assumed to begin at the
root directory when the volume specifier is included.
U sing Directories and Files
5-7