Table of Contents
Advertisement
If an occurrence of these letters is found, the system displays the program line containing
the pattern and a confirmation:
300
PRINT "A pattern of circles is shown on the display."
Found
"A
pattern"
You can choose any of the following actions:
• Edit the line (optional): move the cursor, and change, add, or delete characters.
• Press
I
Return
1
to store the edited (or unchanged) line.
• Scroll the program up or down (with the
0
or [!] cursor keys), which cancels the
FIND mode.
• Press
I
CONTI NUE
1
(@]) to leave the line unchanged and continue the search.
If you choose to remain in FIND mode, press
I
Return
I.
After checking syntax of the
line, the FIND command will begin searching for the next occurrence of the specified
characters; if the modified line contains a syntax error, you may correct the error and
press
I
Return
1
again. Once the line is syntactically correct, the FIND command begins
searching for the next occurrence of the specified string.
You will remain in FIND mode as long as the FIND command has additional program
lines to search. The system reminds you that you are in this mode by displaying these
prompts at the bottom, right-hand corner of the screen:
l
Command
.J
If you want to abort the FIND command, then use the
I
Break
1
(I
CLR
1/0
I) key to cancel
the mode. The system will display:
Search aborted at
nnnnn;
"A pattern" not found.
in which nnnnn is the line number at which the FIND was aborted.
Editing and Storing Programs
6-23
Advertisement
Table of Contents
