HP 9000 200 Series Manual page 13

Using the basic 5.0/5.1 system
Table of Contents

Advertisement

If You See Nothing on the Monitor Screen
Here are some possible explanations if there is nothing on the monitor screen:
• The monitor's brightness is not turned all the way up.
• The monitor is not plugged in.
• The computer is not plugged in.
If You Still Have Problems
If you have verified that the above problems do not exist, but you are still not getting a
display, see your computer's Installation Reference for troubleshooting advice.
Choosing a System
Type the number and letter to the left of the
"SYSTEM_BA5"
entry. For example in the
figure below, you would type
OJ 00;
the lower right shows the characters you type.
Volume Specifier
;HP9153. 702. 0
t
0'
Pascal ---.-lP
SYSTEM_P32
Copyright 1985.
Hewlett-Packard Company.
All Rights Reserved.
:HP9153 REMV. 702. 1. 0
BASIC
~@
SYSTEM_BA5
High Resolution CRT
~
Display Type
MC68010 Processor
~
CPU Type
Keyboard
I(
Keyboard Type
::-~:620B
I
HP 98626 at 9
~nterface~ currently
HP 98625 at 14
Installed In computer
HP 98629 at 21
1048402 Bytes
I(
Memory before booting
Figure 1-2. Choosing a System
lB
Loading BASIC into Memory
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 300 series

Table of Contents