Dungs VisionBox Quick Manual

GB
Description
DUNGS VisionBox
Application
The VisionBox allours the setting of the parameter values of
DUNGS control devices via PC, Laptop or Tablet PC
(from WIN 10, with USB connection).
Suitable for:
MPA 4xxx
MPA 51xx
VPM
W-FM25

2. Warnings

2.1 General warnings

The recognised occupational safety
rules and accident prevention regula-
tions must be observed and, if neces-
sary, personal protective measures
must be taken.
All adjustments and settings should
only be performed in accordance with
the instruction manuals of the con-
nected machines.
Never carry out work as long as gas
pressure or voltage is applied. Avoid
open fire. Please observe public regu-
lations.
Prior to assembly, the device must be
inspected for transport damage.
The device must not be exposed to
open fire. Protection against lightning
strikes must be guaranteed.
1 ... 26
Suitable operating systems:
WIN XP, 7, 8, 8.1, 10
Note: Passwords are required to install the software and
for parameterization of the systems.
Please contact your DUNGS sales representative for the
passwords your require.
Protection from environmental im-
pacts and weather conditions (corro-
sion, rain, snow, icing, humidity (e.g.
by condensation), mould, UV radiation,
harmful insects, poisonous, corrosive
solutions/liquids (e.g. cutting and
cooling fluids
Depending on the installation site, it
may be necessary to take protective
measures.
The device may only be operated in
compliance with the operating condi-
tions stated on the type plate.
The device must be protected from
vibrations and mechanical impacts.
The device must not be used in areas
with increased seismic risk
Explanation of the symbols
1, 2, 3,...
•
must be guaranteed.
),
= Order of
action
= Instruction