Advertisement
Genlock Tab:
Genlock:
(OG-US-3500 only)
The OG-US-3500 model includes the feature of locking the SDI output video signal timing to the openGear frame's
reference signal.
Notes:
The feature is enabled or disabled on the 'Signal' tab. (see the previous sections)
Genlock adjustments require the use of external test equipment.
Genlock Position - Vertical:
The vertical offset can be adjusted using either moving the slider bar control with a mouse, or by the up or down
arrow buttons adjacent to the number on the right of the slider bar.
Genlock Position - Horizontal:
The horizontal offset can be adjusted using either moving the slider bar control with a mouse, or by the up or down
arrow buttons adjacent to the number on the right of the slider bar.
APANTAC LLC
(OG-US-3500 only)
US-3x00 User Manual
www.apantac.com
9
Advertisement
