Advertisement
Signal Tabs:
Unit Status Indicators:
Card State: Indicates whether Dashboard software detects an error state from the card.
:
Connection
Indicates whether Dashboard software is communicating via CANBUS with the card.
Signal Status Indicators:
Input Signal: Indicates whether the OG-US-3x00 has detected and locked-on to the incoming video signal.
SDI Output: Indicates whether the OG-US-3x00 is generating an SDI video signal on the outputs. Requires a
successful Input Video Signal lock.
Reference:
(OG-US-3500 only)
Lock Status:
(OG-US-3500 only)
ence signal.
APANTAC LLC
US-3x00 User Manual
Indicates the OG-US-3x00 is receiving a valid genlock reference signal.
Indicates whether the SDI output video signal is locked to the genlock refer-
www.apantac.com
6
Advertisement
