Advertisement
o Four up-converter (UC) inputs
§ Inputs 27,28,31,32
§ 1080i to 1080p when in 3G mode
§ 720p to 1080i when in HD mode
§ Input 31 is Bars pattern from Ross signal generator
o Two down-converter (DC) outputs
§ Outputs 14 and 16
§ 1080i to 720p
§ 1080p to 1080i/720p
• Ross OpenGear Trays
o 1- Analog DA for Timecode from the Ross TSG-2200
o 3- Analog DA's for Reference (Analog Black) from the Ross TSG-2200
o 8- 3G-SDI DA's that are user patchable on the back of the patch bay
o 4- Black Magic 3G-SDI to HDMI converter cards
o 4- Apantec Genlockable Scaler cards
o 1- SDI audio embedder card
II.
PRE-PATCHED ITEMS
Input 31
The test pattern output from the Ross TSG-2200 is connected to input 31. This allows for the
pattern to be available in both HD 1080i and 3G 1080p modes since input 31 has an up-
converter.
MVR 1 and 2
In the Output assignment, MVR 1 and 2 are assigned to outputs 11 and 13 respectively. Outputs
11A and 13A are wired directly to the two 17" monitors in the bridge. The "B" sides of those
outputs are available on the main patch bay and are labelled in green.
In HD 1080i mode, there are four MVR's available. The user can assign these to any of the
output connectors.
REF IN
The REF IN on the patch bay allows for an external sync source to be run to the Ross TSG-2200's
reference input. This allows the entire system to be synchronized to an external source.
[TYPE HERE]
[TYPE HERE]
2
[TYPE HERE]
Advertisement
