Advertisement
US-3x00 User Manual
VGA Input Tab:
VGA Position:
VGA video sources will typically require timing sync adjustments. This tab only applies when the video input format
is configured to 'VGA' on the Signal tab.
Auto Adjust:
When the Auto Adjust button is clicked, the system attempts to lock to and adjust the incoming VGA signal. The Au-
to Adjust action can be repeated if necessary. If the Auto Adjust fails the adjustments can be performed manually
with the Vertical and Horizontal shift buttons.
Vertical:
The Vertical 'Shift Up' and 'Shift Down' buttons allow manual alignment of the VGA input video within the SDI video
output screen.
Horizontal:
The Horizontal 'Shift Left' and 'Shift Right' buttons allow manual alignment of the VGA input video within the SDI vid-
eo output screen.
APANTAC LLC
www.apantac.com
8
Advertisement
