When Using An Older Model Of Touch; Unit - Epson EB-1480Fi Installation Manual

Installing the Touch Unit
When using an older model of Touch Unit
Touch Units that have been used with previous projector models can be connected to the EB-1480Fi and
used again.
After connecting, follow the steps below to setup the Touch Unit.
a
Turn on the Touch Unit (
b
Adjust the Angle of the Laser (
c
Perform Touch Calibration (
c
When infrared deflectors are attached to the projection surface, use it without removing them.
p.89)
s
p.90)
s
p.98)
s
78