Mount - Epson EB-1480Fi Installation Manual

Installing the Wall mount
Installation Procedure for the Wall Mount
Follow the work flow below to install the wall mount.
Route the cables before installing the wall mount according to your installation environment.
c
This manual describes the installation procedure when using the wall mount supplied with the
EB-1480Fi. To install the projector using the ELPMB62, see the Installation Guide for the EB-1485Fi
on the following website.
http://epson.sn/
a
Check the projection distance tables to determine the installation position (
b
Remove the currently installed projector and wall mount (
c
Attach the adjustment unit to the projector (
d
Adjust the arm length of the setting plate, and then attach it to the wall plate (
e
Attach the adjustment unit to the setting plate, and then connect the cables and peripheral devices
( p.40)
s
f
Adjust the position of the image (
g
Attach the covers (
p.41)
s
p.57)
s
p.32)
s
p.34)
s
22
p.23)
s
p.35)
s