Rocker Switch 1-Way - Philips Hue User Manual

Rocker switch 1-way

1. Turn-off circuit breaker
2. Dismount light switch
3. Remove original (live) wires
Tip! Take a photo of the position of
the wiring
4. Place original (live) wires to the
push-in wire connector
5. Push the connector in the
installation box
6. Connect the provided yellow and
white wire to the light switch and
module. Don't extend the provided
wires. Use the positions where you
removed the original (live) wires.
7. Place the module into the installation
box
8. Put back the light switch
9. Turn on the circuit breaker
10. Open the Hue app and select
settings - > accessory configuration
to add the module.
8