Philips Hue User Manual page 25

Toggle/paddle switch 3-way
1. Turn-off circuit breaker
2. Dismount light switch
! Keep ground
wire connected
Gardez le fil de
terre connecté
Mantener
conectado el
cable de tierra
3
3. Remove original (HOT) wires but
keep ground connected
Tip! Take a photo of the position of
the wiring
1
2
4. Place original (HOT) wires into the
wire nut. Never add a neutral
(white wire) to the wire nut.
5. Push the wire nut and cables in the
installation box
6. Connect the provided orange and
yellow wire to the module and light
switch using the screw terminals for
the fork connectors
Don't extend the provided wires
1
2
7. Place the module into the
installation box
8. Put back the light switch
9. Turn on the circuit breaker
10.Open the Hue app and select
settings - > accessory configuration
to add the module
1 2
1
2
1
25