3-Way Switch - Philips Hue User Manual

Toggle/paddle switch 3-way
• For 3-way switching you will need 2 Hue wall switch modules.
1. Follow the same installation instructions as connecting as a single pole
switch with the following exception:
In most cases only the 3 disconnected wires will have to be added to the provided wire
nut. each of the installation boxes. Never add neutral and/or ground to the wire nut.
Attention! Always make sure for all switches there is no voltage, and the corresponding
circuit breaker(s) are turned off.
2. One removed original HOT wire will not be replaced with the provided wires with the
Hue wall switch module, install the provided wires according to the 3-way switch
guidance.
Supply Light Bulb = ON
110 V AC
3-way
switch
Staircase Wiring Circuit Diagram
• Follow in the app the same installation steps for the wall module as a regular single pole
switch and select single rocker (see image 2) for both modules.
You will find 3-way switches typically in
hallways and stairways or bigger rooms
that gives control over a light point from
two positions (see image 1).
3-way
switch
Stairs
image 1
image 2
2x
26