Epson EB-755F Installation Manual page 83

Appendix
Symbol mark Approved stand-
ards
IEC60417 Alternating current
No.5032 To indicate that the equipment is suitable for alternating current
only; to identify relevant terminals.
IEC60417 Direct current
No.5031 To indicate that the equipment is suitable for direct current only;
to identify relevant terminals.
IEC60417 Class II equipment
No.5172 To identify equipment meeting the safety requirements specified
for Class II equipment according to IEC 61140.
ISO 3864 General prohibition
To identify actions or operations that are prohibited.
ISO 3864 Contact prohibition
To indicate injury that could occur due to touching a specific part
of the equipment.
--- Never look into the projection window while the projector is on.
--- To indicate that you must never place anything on the projector.
ISO3864 Caution, laser radiation
IEC60825-1 To indicate the equipment has a laser radiation part.
ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as electric shock, if the equipment
is disassembled.
IEC60417 Standby, partial standby
No.5266 To indicate that part of the equipment is in the ready status.
ISO3864 Caution, movable parts
IEC60417 To indicate that you must keep away from movable parts ac-
No.5057 cording to protection standards.
IEC 60417-6056 Caution, movable fan blades
To indicate that you must keep away from the blades of the mov-
able fan according to protection standards.
IEC 60417-6043 Caution, sharp corners
To indicate that you must not touch the sharp corners of the
product according to protection standards.
-- Never look into the projection window while the projector is on.
ISO7010 Warning, light emission (UV, visible light, IR and so on)
No. W027 To indicate that you must be careful not to injure your eyes or
ISO 3864 skin when near light emitting sections.
IEC60417 Not to be used in residential areas
No.5109 To indicate that the electrical equipment/device is not suitable
for use in a residential area.
Meaning
82