Preparations Before Adjusting - Epson EB-755F Installation Manual

Installing the Wall mount
Select the area you want to adjust and manually correct the image. This is useful when you want to make fine
adjustments to the projection position after making mechanical adjustments using the guide screen.
Quick Corner
c
•
Images are not stable immediately after turning on the projector. After starting projection, wait for at
least 30 minutes before adjusting the image.
•
Install and adjust the projector at a room temperature that is close to the actual intended usage
environment. If the temperature changes, the position of the image may shift.
•
When setting up multiple projectors using the batch setup function, perform the batch setup before
adjusting the projected image.
•
We recommend the mechanical position adjustment of the setting plate to adjust the image when
you want to maintain image quality.

Preparations before adjusting

a
Press the [ ] button on the remote control or the control panel to turn on the projector
b
Open the air filter cover on the side of the projector
Arc Correction
57
Point Correction