Introduction
Accessories
Part
Name
Template sheet
Mini PC plate
Mini PC belt
Cable binding belt
Masking sticker
Safety wire set
Hexagon wrench (for M4)
Spanner (No. 13 for M6)
M4 x 12 mm hexagon sock-
et head cap bolt with wash-
er/spring washer (x13)
M6 x 20 mm hexagon
shoulder head bolt with
washer/spring washer (x1)
M6 x 20 mm cross recessed
head shoulder screws with
plastic washers (x3)
7
Application
Attach this to the wall before attaching
the wall plate, and use it to drill neces-
sary holes.
Attach this to the wall plate when in-
stalling a mini PC or stick PC.
Secure the PC to the plate when at-
taching a mini PC or a stick PC that can-
not be attached using screws.
Secure excess cables after performing
wiring.
Stick this over the groove in the arm of
setting plate to cover it up after instal-
ling.
Connect to the wall mount and the
projector to prevent the projector from
falling. See the user's guide supplied
with the safety wire set for more details.
-
-
•
Assemble the wall plate as shown in
the figure on
p.6
(x5)
•
Secure the adjustment unit to the pro-
jector (x4)
•
Secure the adjustment unit to the set-
ting plate (x4)
Secure the setting plate to the wall
plate.