Specifications; Safety Precautions - EUFAB 16474 Operating Instructions Manual

GB 12V charger for cup holder
Item number 16474
Contents
1. Proper use of the product
2. Scope of supply

3. Specifications

4. Safety precautions

5. Explanation of symbols
6. Operating instructions
6.1 Overview
6.2 Connecting the charger
6.3 Connecting consumers to the charger
6.4 Removing the charger
6.5 Charge status display for the vehicle battery
7. Maintenance and care
7.1 Maintenance
7.1.1 Changing the fuse of a 12 V vehicle connector
7.2 Care
8. Notes regarding environmental protection
9. Contact information
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes! Not
observing such may lead to personal injury, damages to the device or your property! Store the original
packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the
product, please include these operating instructions as well. Please check the contents of package for integrity and
completeness prior to use!
1. Proper use of the product
The 12V charger for cup holder is used for charging and operating up to four USB devices. In doing so, the overall load of the
outputs may not exceed 7.2 A. In addition, there are two 12 V sockets with an overall load of a maximum of 6 A. The charger
is inserted into the standard cup holder of a car and connected to the cigarette lighter/on-board socket. This device is not de-
signed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist
knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these operating instructions,
particularly the observance of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and
may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
2. Scope of supply
1x 12 V charger
3. Specifications
Dimensions (L x W x H): 83 x 83 x 85 [mm]
Weight: 0.240 kg
Length of the connection cable: Approximately 78 cm
4. Safety precautions
• The warning triangle labels all instructions important to safety. Always follow these otherwise you could
injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
4
1x Operating instructions
Input: 12 V DC
Output: 4 x USB, 5 V, overall 7.2 A
2 x 12 V, overall 6 A
4
4
4
4
5
5
5
5
5
6
6
6
6
6
6
6
6