Beaba 920290 Instructions Manual page 11

Check that the changing table is compatible with the bath's dimensions and
shape.
e d
c
42 cm mini - 63 cm maxi
Attach the rear suction cups (e) to the edge
of the bath. Then adjust the front suction
cups (d) so that they are centred on the
front edge of the bath. Check that the 4
suction cups are positioned properly by
trying to lift the product. It should not be
possible to remove the changing surface.
Adjust the 3 adjustable feet (c) so that
they rest against the sides of the bath.
Check that the feet are adjusted properly
by pulling the changing table towards you.
11
5 cm mini