Beaba 920290 Instructions Manual page 10

3. Place the adjustable feet (c) in the rails (h) according to the diagram below.
c
h
c
4. Position the changing mattress (b) on the table. Pass the strings through
the casings at the rear of the table and tie a knot to attach the mattress.
CAUTION: Always check that all the parts are fastened properly
before using the product.
USING ON A BATH
• Always check that the suction cups are fastened properly.
• Always clean the surface and wet the suction cups before positioning.
• Always check that the bath's dimensions are suitable for the changing
table before positioning it.
Place the product on the bath ensuring that the adjustable feet (c) are inside
the bath.
h
10
c
The slope must
always be tur-
ned towards the
exterior of the
changing table.