Subscribe to Our Youtube Channel
Related Manuals for Acromag AVME9630 Series
Summary of Contents for Acromag AVME9630 Series
- Page 1 (217) 352-9330 | Click HERE Find the Acromag / Xembedded / Xycom AVME9630 at our website:...
- Page 2 VMEbus 3U/6U Non-Intelligent Carrier Boards USER’S MANUAL ACROMAG INCORPORATED 30765 South Wixom Road P.O. BOX 437 Wixom, MI 48393-7037 U.S.A. Tel: (248) 624-1541 Fax: (248) 624-9234 Copyright 1994, Acromag, Inc., Printed in the USA. Data and specifications are subject to change without notice. 8500-482-H09F008...
-
Page 3: Table Of Contents
5.0 SERVICE AND REPAIR..........The information contained in this manual is subject to change SERVICE AND REPAIR ASSISTANCE......without notice. Acromag, Inc. makes no warranty of any kind with PRELIMINARY SERVICE PROCEDURE...... regard to this material, including, but not limited to, the implied 6.0 SPECIFICATIONS............ -
Page 4: Vmebus Interface Features
Connects to optimum filtering and isolation between the IP modules and Acromag Termination Panel 5025-552 from the rear of the card the carrier board and allows analog signals to be accurately cage, and to AVME9630/ 9660 boards within the card cage, via... -
Page 5: 2.0 Preparation For Use
Programmable software registers default to IP interrupt requests-disabled and VMEbus interrupt level-none. For repairs to a product damaged in shipment, refer to the Acromag Service Policy to obtain return instructions. It is Address Decode Jumper Configuration suggested that salvageable shipping cartons and packing material The carrier board interfaces with the VMEbus as a 1K byte be saved for future use in the event the product must be shipped. -
Page 6: Interrupt Configuration
Threaded connector on the AVME9630/9660 board, as viewed from the front. metric M2 screws and spacers (supplied with Acromag IP modules) The connector consists of 32 rows of three pins labeled A, B, and provide additional stability for harsh environments (see Drawing C. -
Page 7: Power-Up Timing And Loading
This is particularly important for analog BG2OUT* I/O applications when a high level of accuracy/resolution is needed SYSCLK BG3IN* SYSFAIL* (12-bits or more). Contact your Acromag representative for BG3OUT* BERR* information on our many isolated signal conditioning products that DS1* BR0* SYSRESET* could be used to interface to the IP input/output modules. - Page 8 INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ Table 3.1C: AVME9630/9660 Carrier Board Registers Base Base Address + EVEN Byte ODD Byte Address + Base Base (Hex) (Hex) Address + EVEN Byte ODD Byte Address + (Hex) (Hex) IP A IP A 0000...
-
Page 9: Identification Prom
Pending (GIP) when there is no interrupt pending. (Read) Polling this bit will reflect the board's pending interrupt status, even if the Acromag ID Global Interrupt Enable bit is set to "0". Code Reset condition: Set to "0". Bits 1, 0 Not used - equal "0"... -
Page 10: Ip Error Register
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ IP Error Register - (Read, Base + C5H) Bit 2 Writing a "1" to this bit enables the The IP Error Register allows the user to monitor the Error IP-C Memory Enable memory space for IP C. -
Page 11: Ip Interrupt Enable Register
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ IP Interrupt Enable Register - (Read/Write, Base + E1H) IP Interrupt Clear Register - (Write, Base + E5H) The IP Interrupt Enable Register is used to individually The IP Interrupt Clear Register is used to individually clear the enable/disable IP interrupts. -
Page 12: Generating Interrupts
A wide variety of IP modules are level of the interrupt it is seeking on A01-A03. currently available (from Acromag and other vendors) that allow 4. When the asserted VMEbus IACKIN* signal (daisy-chained) is... -
Page 13: Carrier Board Registers
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ The carrier board’s VMEbus data transfer rates are typically: similar length PC board trace lengths are employed to minimize • clock skew between the IP modules. 500ns for accesses to the carrier board registers. •... -
Page 14: Power Failure Monitor
It is highly recommended that a non-functioning asserting the interrupt request level as pre-programmed in the board be returned to Acromag for repair. The board can be carrier’s Interrupt Level Register. The carrier board’s interrupt logic damaged unless special SMT repair and service tools are used. -
Page 15: Vmebus Compliance
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ registers); measured from the A: Right angle pins falling edge of DSx* to the falling 3M 2550-5002UB (or equiv.) edge of DTACK*. B: Straight pins, 750nS Typical (IP registers with 3M 2550-6002UB (or equiv.) no wait states). -
Page 16: Appendix
Cable: 50-wire flat ribbon cable, 28 gage. Non-Shielded cable equivalent) employing long ejector latches and 30 micron gold model uses Acromag Part 2002-211 (3M Type C3365/50 or in the mating area (per MIL-G-45204, Type II, Grade C). equivalent). Shielded cable model uses Acromag Part 2002- Connects to Acromag termination panel 5025-552 from the 261 (3M Type 3476/50 or equivalent). -
Page 17: 4501-450 Avme9630/9660 Jumper & Ip Locations 16 4501-434 Mechanical Assembly Drawing
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ - 16 -... -
Page 18: 4501-451 Avme9630/9660 Block Diagram
PIN 1 ON CABLE 1004-512 PIN 1 IS DESIGNATED WITH STRAIN RELIEF RED INK 1004-534 NOTE: SEVEN DIGIT PART NUMBERS ARE ACROMAG PART NUMBERS (XXXX-XXX). MODEL 5025-550- x SIGNAL CABLE, NON-SHIELDED MODEL 5025-550-x SCHEMATIC CABLE 5025-550-x, NON-SHIELDED 4501-462 - 17 -... -
Page 19: 4501-463 Cable 5025-551 (Shielded)
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ CABLE 5025-551-x, SHIELDED MODEL 5025-552FLK TERMINATION PANEL SCHEMATIC TERMINATION PANEL ACROMAG PART NUMBER 4001-107. 2.72 (69.0) SIDE VIEW 3.67 (93.1) TOP VIEW NOTES: DIMENSIONS ARE IN INCHES (MILLIMETERS). TOLERANCE: +0.020 (+0.5). -
Page 20: 4501-465 Transition Module Trans-Gp
INDUSTRIAL I/O PACK SERIES AVME9630/9660 VMEbus 3U/6U CARRIER BOARDS ___________________________________________________________________________________________ - 19 -...
Need help?
Do you have a question about the AVME9630 Series and is the answer not in the manual?
Questions and answers