Page 1
(217) 352-9330 | Click HERE Find the Acromag APC8620A at our website:...
Page 2
Wixom, MI 48393-7037 U.S.A. Tel: (248) 624-1541 Fax: (248) 624-9234 Copyright 2000, Acromag, Inc., Printed in the USA. Data and specifications are subject to change without notice. 8500-576-E01B010 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
___________________________________________________________________________________________ The information contained in this manual is subject to change APPENDIX..............without notice. Acromag, Inc. makes no warranty of any kind with CABLE: MODEL 5025-550..........regard to this material, including, but not limited to, the implied CABLE: MODEL 5025-551..........
Acromag personal computer carrier and consist of a carrier modules and our personal computer carriers to be easily OLE control, and an OLE control for each Acromag IP module as integrated into Windows application programs, such as well as a generic OLE control for non-Acromag IP modules.
(see IP location drawing 4501-671 or 4501-676 for physical locations of the IP modules). Flat cable assemblies and Acromag termination panels (or user defined terminations) can be CARD CAGE CONSIDERATIONS quickly mated to the field I/O connectors. Pin assignments are...
INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD ___________________________________________________________________________________________ IP module D and E field connectors (as shown in Drawing 4501- Signal Signal 671). On the APC8621 the Strobe signals for each of the three Ground B12 A12 Ground IP modules are routed on the printed circuit board to the location Ground B13 A13...
Since this PCI carrier is relocatable and not hardwired in low. The APC8620/8621 signals the completion of a read or address space, this carrier’s device drive provided by Acromag write cycle by driving LRDYi# low. uses the mapping information stored in the carrier’s Configuration 2.
INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD ___________________________________________________________________________________________ Configuration Registers Base Base Address + High Byte Low Byte Address + The PCI specification requires software driven initialization (Hex) (Hex) and configuration via the Configuration Address space. This PCI 0019 0018 carrier provides 256 bytes of configuration registers for this...
INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD ___________________________________________________________________________________________ Carrier Status/Control Register - (Read/Write, Base + 00H) IP Interrupt Pending Register - (Read, Base + 02H) The Carrier Board Status Register reflects and controls The IP Interrupt Pending Register is used to individually functions globally on the carrier board.
A wide variety of IP modules are Write interrupt vector to the location specified on the IP and currently available (from Acromag and other vendors) that allow perform any other IP specific configuration required - do for interface to many external devices for digital I/O, analog I/O, and each supported IP interrupt request.
It is highly recommended that a non-functioning board be returned to Acromag for repair. The board can be When an IP module places data on the bus, for all data read damaged unless special SMT repair and service tools are used.
INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD ___________________________________________________________________________________________ 6.0 SPECIFICATIONS request until it completes with the requested data. Write Complete Time……..………Time from FRAME# active PHYSICAL until LRDYi# active. 650nS Typical carrier register Physical Configuration....PCI 5V Card 750nS Typical 8-bit and 16-bit Length (APC8620)....12.283 inches (312.0 mm) IP module write (assuming 0 Length (APC8621)....
INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD ___________________________________________________________________________________________ ENVIRONMENTAL equivalent). Strain Relief - Acromag Part 1004-534 (3M Type 3448-3050 or equivalent). Operating Temperature....0 to +70°C; Keying: Headers at both ends have polarizing key to prevent -40 to +85°C (E Versions) improper installation.
IP MODULE TO CARRIER BOARD MECHANICAL ASSEMBLY ASSEMBLY PROCEDURE: 1. THREADED SPACERS ARE PROVIDED BY ACROMAG IN TWO DIFFERENT 3. CAREFULLY ALIGN IP MODULE TO CARRIER BOARD AND PRESS LENGTHS WITH IP MODULES. THE SHORTER LENGTH IS FOR USE WITH TOGETHER UNTIL CONNECTORS AND SPACERS ARE SEATED.
Need help?
Do you have a question about the APC8620 Series and is the answer not in the manual?
Questions and answers