Installation - pro user DRC4310DC Operating Manual

INSTALLATION

These instructions do not apply to all vehicles. They are only meant as a general guide due to the
number of different makes & models. For vehicle-specific questions contact your vehicle's
manufacturer.
Backup-Camera installation
There are several ways to mount the camera on the back of your car. But the most convenient is to
mount it near the license plate. Supplied is one mounting plate that can be fixed behind the license plate,
and the mounting plate have been installed in the camera.
The camera itself is screwed on the mounting plate. The camera is tiltable, camera angle can be adjusted
manually on vertical direction. Make sure that its field of view and detection are not obstructed.
With some type of cars, it is not possible to mount the camera near the license plate. You may have to
find another spot at the back of your car to mount it.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Position the supplied mounting plates (with camera together) behind the license plate bracket.
Secure both license plate bracket and mounting plates with the license plate bracket bolts/screws.
8