MARUTI SUZUKI Maruti 800 Service Manual page 36

5-Speed M/T
4-Speed M/T
Manual Transmission Oil Inspection and Change
Oil Inspection for 5-speed M/T
1) Inspect transmission case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove oil filler/level plug (1) of transmission.
4) Check oil level.
Oil level can be checked roughly by means of filler/level plug
hole. That is, if oil flows out of level plug hole or if oil level is found
up to hole when level plug is removed, oil is properly filled.
If oil is found insufficient, pour specified oil up to level hole.
For specified oil, refer to description of oil change under On-Ve-
hicle Service in Section 7A1.
5) Apply sealant to filler/level plug and tighten it to specified torque.
Oil change for 5-speed M/T
1) Place vehicle level and drain oil by removing drain plug (2).
2) Apply sealant to drain plug after cleaning it and tighten drain
plug to specified torque.
3) Pour specified oil up to level hole.
4) Tighten filler plug to specified torque.
For recommended oil, its amount and tightening torque data, re-
fer to On-Vehicle Service of Section 7A1.
Oil inspection for 4-speed M/T
1) Inspect transmission case for evidence of oil leakage. Repair
leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Take out oil level gauge from transmission case and wipe off oil.
4) Bring face (1) of the oil level gauge to contact face (2) of the
transmission case (3) and check oil level indicated by the oil on
the gauge.
Oil level must be somewhere between FULL level line (4) and LOW
level line (5) on the gauge.
MAINTENANCE AND LUBRICATION 0B-17