Connecting To The Inserts On An Instrument Amplifier - Alesis ModFX Phingr Reference Manual

2
Connections
Connecting to the inserts on an instrument
amplifier:
The insert send on a guitar or bass amp is usually labeled
"effects send and return" or "insert send and return". This
allows you to preamplify your instrument before flanging it
and sending it to the power amp.
Most guitar amps are single channel, so connect a single insert
cable from the amp to the LEFT INPUT and LEFT OUTPUT of
the Phlngr. Some amps have separate "effect send" and "effect
return" jacks; for these, use standard cables. Check the manual of
your amplifier for details.
If you are using a dedicated rack-mount preamplifier, another
method would be to insert the Phlngr between the preamp and the
input(s) of the power amp.
22
N e v e r c o nn e c t t he
P hl ng r be t w e e n th e
p ow e r a m p an d t he
s pe a k e r !
The h ig h p owe r le ve ls cr e ated
b y th e p ower am p will
d es tr oy th e c ir cu itr y of th e
Phlng r.