Processing Synth And Audio Tracks - Alesis Fusion Reference Manual

Processing Synth and Audio Tracks

Note: This page will look different depending on what you select for the
"Process" parameter (see below).
Menu: Song/Editor/Tracks/Process
Parameter: Process
Value Range: Clear, Crop, Cut, Copy, Paste Over, Paste Mix, Slide,
Adjust Note Gate, Adjust Note Velocity, Note Transpose,
Note Quantize, Audio Gain, Audio Fade
(Note: This parameter MUST be set to "Clear" for the correct
parameters to be displayed on the remainder of the page. If
your page looks different than the one displayed above, it is
probably because this parameter is not set to "Clear.")
The "clear" setting allows you to erase different parts of your selected
track.
Menu: Song/Editor/Tracks/Process
Parameter: Edit Start
Value Range: (varies)
This parameter sets the point at which your edits will start to take place.
Menu: Song/Editor/Tracks/Process
Parameter: Edit End
Value Range: (varies)
This parameter sets the end point after which your track will not be
affected.
Menu: Song/Editor/Tracks/Process
Parameter: Notes
Value Range: Included, Not Included
Set this parameter to "Included" if you want your notes to be cleared
upon execution. If you'd like note values to be left alone, set this value
to "Not Included."
Chapter 3: Fusion Modes
3
147