Alesis Fusion Reference Manual page 156

3
Chapter 3: Fusion Modes
Note: This page will look different depending on what you select for the
"Process" parameter (see below).
Menu: Song/Editor/Tracks/Process
Parameter: Process
Value Range: Clear, Crop, Cut, Copy, Paste Over, Paste Mix, Slide,
Adjust Note Gate, Adjust Note Velocity, Note Transpose,
Note Quantize, Audio Gain, Audio Fade
(Note: This parameter MUST be set to "Paste Over" for the
correct parameters to be displayed on the remainder of the
page. If your page looks different than the one displayed
above, it is probably because this parameter is not set to
"Paste Over.")
The "Paste Over" setting allows you to take a segment from your track
(using either the "Cut" or "Copy" processes and to place this segment
over an existing part of your track. Note that this method deletes
whatever is already on your track before the new material is placed.
Menu: Song/Editor/Tracks/Process
Parameter: Edit Start
Value Range: (varies)
This parameter sets the start point at which your cut (or copied) track
segment will be placed.
Menu: Song/Editor/Tracks/Process
Parameter: Repetitions
Value Range: 1 – 100
If you want your cut (or copied) segment to be placed one time, leave
this parameter set to "1." If you would like to paste multiple copies of
this segment, change this parameter accordingly. Once you press the
"Execute" action button, copies of the segment will be placed back-to-
back as many times as you have specified here.
Menu: Song/Editor/Tracks/Process
Parameter: Execute
Value Range: (none)
This button executes the current process you've selected.
154