Alesis DG8 Reference Manual page 40

QCard as Primary:
1. Select a QCard Program to be the Primary by pressing the
the
2. Press and hold the
the
QCard as Both Primary and Layer:
1. Select a QCard Program to be the Primary by pressing the
the
2. Press and hold the
selects another QCard Program to be the Layer sound. Use the
arrows, if necessary, to select the desired QCard Program. Please note that
this method – using the
you can layer two Card Programs.
QCard Programs in a Split
You can select a QCard Program to be the Split sound in the lower range:
1. Press and hold the
CARD
keyboard. Use the
Program.
2. The DG8 will keep the current Primary Sound selected as the sound for the
upper range of the keyboard. If necessary, press any of the Keyboard Bank
buttons to select a new Primary Sound; use the
to select the desired Keyboard Program.
You can select a QCard program to be the Primary Sound in the upper range of a
Split setup:
1. Press a Bass Bank button to set up a standard split.
2. Press the
range. Use the
Program.
You can select two QCard Programs in a Split setup, one for the Split sound in the
lower range of the keyboard and one for the Primary Sound in the upper:
1. Press and hold the
CARD
keyboard. Use the
Program for the lower range.
2. Press the
becomes the Primary sound on the upper range of the keyboard. Use the
and
range.
DG8 R M
EFERENCE ANUAL
and arrows, if necessary, to select the desired QCard Program.
LAYER/OFF
and arrows, if necessary, to select the desired Layer sound.
and arrows, if necessary, to select the desired QCard Program.
LAYER/OFF
LAYER/OFF
button. While you are pressing
SPLIT/OFF
. The QCard becomes the Split sound on the lower range of the
and arrows, if necessary, to select the desired QCard
button. This selects the QCard as the Primary for the upper
CARD
and arrows, if necessary, to select the desired QCard
button. While you are pressing
SPLIT/OFF
. The QCard Program becomes the Split sound on the lower range of the
and arrows, if necessary, to select the desired QCard
button (without holding any other buttons). The QCard
CARD
arrows, if necessary, to select the desired QCard Program for the upper
Chapter 2: Playing the DG8
button, then press a Keyboard Bank button. Use
button, then press the
CARD
button to create the Layer – is the only way
and
button. Use
CARD
button. Use
CARD
button again. This
and
, press
SPLIT/OFF
arrows, if necessary,
, press
SPLIT/OFF
41