Table of Contents
Advertisement
Chapter 2: Playing the DG8
select another Program within the current Keyboard or Card Bank for the Layer
sound. When the cursor is at the
another Program within the current Bass Bank or Card Bank for the Split sound.
A complete tutorial on using the
programs and setting up Layers and Splits is provided in the section
Internal Sounds
Other
and
The
and
the
and
TUNE
Acceleration
Note that when selecting Programs and changing numeric values in the display,
pressing and holding an arrow will accelerate the scrolling. This is most noticeable
(and most handy) when selecting Card Sounds. Because there are 128 sounds on an
Alesis QCard, this feature is another time-saver.
Display Wrap
Also, when selecting Programs (internal or card), pressing an arrow repeatedly (or
holding it down) will wrap the display: pressing or holding the
selecting any internal sound will display all four sounds in that Bank in succession.
When the fourth sound is reached, continued pressing of the
display to the first sound in the Bank and continue on. By the same token, scrolling
backward with the
sound is reached.
Wrapping is also especially handy with Card Sounds as it solves the problem of
scrolling through 128 programs just to get to the first (or last) sound on the card.
Wrapping also occurs when selecting MIDI Channels.
Reset
The last feature of the arrows is the Reset function. When selecting numeric values
for Master Tune or Keyboard Scaling, for example, pressing both arrows
simultaneously resets the function to its default value, which is usually 0 or a value
that represents a mid-point in the function's range. When displayed, pressing the
and
arrows together will reset the following parameters:
SET SPLIT
TRANSPOSE
TUNE
Page 4:
MIDI
When the display is in its normal mode of displaying selected Programs, pressing the
and
arrows together will reset Keyboard Bank or Bass Bank programs to "
Card Bank programs reset to
cursor to the sound you want to reset with the
34
SPLIT
and
on the next page.
Arrow Functions
arrows are also used to select parameters and change numeric values in
modes.
MIDI
arrow wraps the display back to the fourth sound after the first
Keyboard Scaling
000
. When resetting a displayed Program, move the
sound, pressing the
and
arrows and cursor to select sound
split point resets to C2
transpose value resets to Middle C
Master Tune resets to
50
resets to
button.
PLAY
DG8 R
arrows will select
Selecting
button when
button will wrap the
00
A
".
M
EFERENCE
ANUAL
Hide quick links:
Advertisement
Table of Contents
