Table of Contents
Advertisement
■ Displaying the cost for Login and Document Release jobs on the screen:
You can set the machine to display the calculated cost for the job on the touch
panel display when a user is performing Login and Document Release at the
machine.
For more information on cost centers, see the documentation included with the
uniFLOW OM software.
Activation and Settings of the uniFLOW OM Integration
The overview of the activation and settings of the uniFLOW OM integration is as
follows:
System Environment
To activate the uniFLOW OM integration, the machine must be connected to the
uniFLOW OM server (a server in which the uniFLOW OM software is installed) over
a network. For more information, see the documentation included with the
uniFLOW OM software.
Settings of the uniFLOW OM Integration
The settings of the uniFLOW OM integration such as user registration can be made
only on the uniFLOW OM server. Although no special settings on the machine are
required, be sure to check the Department ID and User ID Management settings for
a proper combination of these conventional management modes and the uniFLOW
OM integration. (See "Settings of Department ID and User ID Management for the
uniFLOW OM Integration," on p. 5.)
Authentication Modes by the uniFLOW OM Integration
The uniFLOW OM integration provides the following authentication modes:
Authentication to the Machine
Users are prompted to log in to the machine. This means that users must
authenticate themselves when they use the machine's functions such as the Copy
or Send/Fax functions.
Authentication to the Login and Document Release Function
Users are prompted to log in to the Login and Document Release function. This
means that users can use the machine's functions such as Copy or Send/Fax
functions without logging in at the machine. Instead, users must authenticate
themselves only when they use the Login and Document Release function.
3
Managing the Machine with the uniFLOW OM Integration
Advertisement
Table of Contents
