Rear Panel Operation - Alesis RoadFire 15 Quick Start Owner's Manual

8. Power Cord Outlet – Plug a standard IEC cord into this jack and into a
properly grounded AC outlet.
9. Fuse – Replaceable fuse. See the rear panel of the Roadfire for details.
10. Power Connection Light – This light illuminates whenever the Roadfire is
plugged in.
11. Power Switch – Turns the Roadfire on and off. The Roadfire charges the
internal battery as required even when this switch is set to "off."
12. FOOTSWITCH UP/DOWN INPUT – Plug footswitches into these 1/4" jacks.
Footswitches serve the same functions as the Program Up and Down buttons.
13. EXPRESSION PEDAL INPUT – Plug an expression pedal into this 1/4" jack
for easy control over EFFECT parameters.
14. AUX INPUT – Plug a CD player or other audio device into these RCA jacks and
play along!
15. STEREO LINK OUTPUT – Use a 1/4" TS cable to connect this jack to the
input of another amplifier for true stereo. The Roadfire provides true stereo
output instead of the standard mono; many of the Roadfire's excellent effects will
sound even better when you listen to them in stereo. If you don't have a second
amplifier, you can enjoy the stereo effects by listening with headphones.
16. SPEAKER OUTPUT – Use a 1/4" TS cable to connect this jack to an external
8-ohm speaker. Doing so disconnects the internal speaker.

Rear panel operation

3