Alesis RoadFire 15 Quick Start Owner's Manual page 3

Quick Start Owner's Manual (English)
Quick Setup for the Roadfire
Make sure all items listed on the front of this guide are in the Roadfire's box.
Read the Important Safety Instructions document included with the Roadfire.
Study the Hookup Diagram below.
Make sure all equipment is turned off and all gain knobs are set to zero.
Connect your guitar and other equipment to the Roadfire in the manner
illustrated below.
Plug in all devices and turn them on. Note: Leave the Roadfire plugged in for at
least eight hours before operating it under battery power for the first time.
Turn the EFFECT knob to the PLAY position. Use the PROGRAM
UP/DOWN buttons to audition all of the Roadfire's built in effects.
When finished, turn off the amp before disconnecting any equipment to
prevent damage to the speaker.
Go to http://www.alesis.com to register the Roadfire.
1