Special Start-Up - Zoom G2.1u Service Manual

There are some methods to start up the G2.1u for service.
To start up the unit, set the [POWER] switch to "ON" while holding any keys.
The following table shows which keys are held down.
Play Mode
Initialization
Test Mode
Data transfer
Version
Revision
● Play Mode
Normal operation.
See the operation manual.
● Initialization
This startup recovers the factory default condition.
Refer to page 17.
● Test Mode
This startup is used for the function Test.
Refer to page 13-15.
● Data transfer
This startup backs up the user's effect patch data.
Refer to page 11, 12.
● Version
This startup indicates the software version number.
The indication "0003" appears on the display. (depend on circuit versions)
● Revision
This startup indicates the software revision number.
The indication "9005" appears on the display. (As of October, 2005)

Special Start-up

Keys held down
None
[STORE]
[TYPE +] + [TYPE -] + [RHYTHM]
[STORE] + [RHYTHM]
[UP]
[DOWN]
Recovering factory default
Checking software version
Checking software revision
- -
16
Purposes
Normal operation
Function test
Backing up user's data