General Information - Helite B’Safe User Manual

General information ...................................................15
First use ............................................................................ 16
Safety precautions ..................................................... 17
Technical description ............................................... 18
Daily use ........................................................................... 19
Reuse B'Safe after an inflation ........................... 23
Maintenance .................................................................. 24
Operation & malfunction ....................................... 25
Warranty & after sales service ............................ 26
Disclaimer........................................................................ 26
The B'Safe vest was created to protect urban cyclists in their daily ride.
B'Safe is not adapted for the following uses: downhill mountain biking, bicycle
!
acrobatics, BMX, scooter, motorcycle, running, segways, electric unicycle and
self-balancing board.

1. GENERAL INFORMATION

The B'Safe package contains: an airbag vest, a saddle sensor, an e-cartridge, a USB
cable and a little magnet.
B'Safe vest: It contains the airbag, a CDU (Crash Detection Unit) sensor which
a.
analyzes the situation in real time (cyclist's motion, position and speed) and detects
accidents.
b. SDU saddle sensor: It detects impacts on the bicycle. Discreet and autonomous
(life span around 5 years, not rechargable), it should be installed under the saddle of
the bike (see page 16).
c. E-cartridge: It inflates the airbag in the event of a fall or an accident. It is for single
use only and must be replaced after each inflation.
d. USB Cable: To recharge the vest battery (see page 20).
cable is included, you can plug it into any standard USB charger.
e. Magnet: It should be used for the first use of the vest (see page 16 Vest and sensor
pairing) and also for periodic control.
USER GUIDE
See schematic manual
CAUTION: only the USB