Assembly - HAMPTON BAY S5-BRH00800 Use And Care Manual

Assembly

1
Assembling the side panels
□ Attach the back panel (M) to the left and right side panels
(N and O) using four ¼ in. x 45 mm bolts (BB) and washers
(EE). Guide the bolts (BB) through the holes in the back
panel (M) and into the pre-drilled holes in the side panels
(N and O). Hand tighten only.
NOTE: Bolt covers (DD) are not added until step 9. They
are shown in the illustrations prior to step 9 to illustrate
their proper locations.
N
3
Attaching the door panel
□ Attach the "L" connector of the door panel (P) to the
right side panel (N) using a ¼ in. x 15 mm bolt (AA) and
washer (EE). Guide the bolt (AA) through the hole in the "L"
connector portion of the door panel (P) and into the pre-
drilled hole in the right side panel (N). Do not over tighten.
O
EE
BB
DD
M
N
EE
AA
DD
P
2
Attaching the middle support
□ Attach the middle support (S) to the side panels (N and
O) using two ¼ in. x 15 mm bolts (AA) and washers (EE).
Guide the bolts (AA) through the holes in the middle
support (S) and into the pre-drilled holes in the side panels
(N and O). Hand tighten only.
M
O
4
Securing the door panel
□ Attach the top of the door panel (P) to the right side
Do not over tighten.
7
Please contact 855-HD-HAMPTON for further assistance.
N
EE
DD AA
S
N
DD
AA
EE
P
HAMPTONBAY.COM