Akai MINIAK Reference Manual page 36

D. LFO Depth
This adjusts the magnitude of the LFO modulation. When set to 0%, the LFO has no effect on
the notch frequencies.
Range: 0 – 100%
E. LFO Shape
This selects between the two LFO shapes.
Range: sine wave, triangle wave
F. LFO Tempo Sync
This selects whether the LFO rate is synchronized to the MINIAK's tempo. When "follow tempo"
is selected, the LFO Rate parameter is displayed as a multiple of the Tempo.
Range: fixed rate, follow tempo
Theta Flanger: The Theta Flanger is a combination of phaser and flanger effects. The input is filtered
through a 32-stage phaser, and then fed to the input of a flanger. The sound is very interesting and
musical.
A. Feedback
This is the amount of the flanger output added back into the input to produce a deeper effect.
Range: –100% to 0 to +100%
B. Manual Delay
This is the base delay time that is modulated by the LFO to create the Flange effect.
determines the frequencies of the notches and peaks.
Range: 0 – 100%
C. LFO Rate
This is the rate of the Low Frequency Oscillator.
Range: 0.010Hz – 4.800Hz, or 1/16 (4 whole notes) to 16 (64th note) if Tempo Sync is enabled
D. LFO Depth
This adjusts the magnitude of the LFO modulation. When set to 0%, the LFO has no effect on
the notch frequencies.
Range: 0 – 100%
E. LFO Shape
This selects between the two LFO shapes.
Range: sine wave, triangle wave
F. LFO Tempo Sync
This selects whether the LFO rate is synchronized to the MINIAK's tempo. When "follow tempo"
is selected, the LFO Rate parameter is displayed as a multiple of the Tempo.
Range: fixed rate, follow tempo
Thru Zero Flanger: A Flange effect using two delay lines (per stereo side) to emulate the classic
flange effect produced using two analog tape machines. Because there are two delay lines in constant
motion, the delay time can fall through zero to become negative. This has a unique sound that can't be
replicated with a standard, single-delay flanger.
A. Feedback
This is the amount of the flanger output added back into the input to produce a deeper effect.
Range: –100% to 0 to +100%
B. Manual Delay
This is the base delay time that is modulated by the LFO to create the Flange effect.
determines the frequencies of the notches and peaks.
Range: 0 – 100%
C. LFO Rate
This is the rate of the Low Frequency Oscillator.
Range: 0.010Hz – 4.800Hz, or 1/16 (4 whole notes) to 16 (64th note) if Tempo Sync is enabled
34
It
It