Ipod/Iphone Operations; Notes On Using Apple Ipod/Iphone; Controlling The Ipod/Iphone - Clarion NX501E Owner's Manual & Installation Manual

12. iPod/iPhone OPERATIONS

iPod/iPhone can be connected by the special
connector cable (CCA-748) separately sold.
Note:
• This system will not operate or may operate improperly
with unsupported versions.
• For detailed information on the playable iPod/iPhone
models, see our home page: www.clarion.com

Notes on using Apple iPod/iPhone

• Do not connect an iPod/iPhone to this unit with a
headphone connected to the iPod/ iPhone.
• After the iPod/iPhone has been connected to this
unit, the buttons of iPod buttons are disabled for
operation in the Music mode. In the Video mode, do
not operate the buttons of iPod.
• When in the iPod mode, a special iPod/iPhone
control screen is displayed different from the main
screens for other modes.
• When in the iPod mode, the screen image input
from the AUX terminal is output to the rear monitor.
• When no data is present, the title display will remain
blank.
• The iPod/iPhone is used with the equalizer function
turned OFF.
• Set the language setting of iPod/iPhone to English
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
Selecting the iPod Audio mode
Connect your iPod/iPhone to the USB connector via
CCA-748 cable. The system will automatically detect
the connected device and the iPod Audio button will
be enabled for operation on the Main Menu screen.
The playback starts after a while, from where the iPod/
iPhone has been paused.
• When iPod/iPhone is already connected
Touch the [iPod Audio] button on the Main Menu
screen. The system changes to the iPod mode, and
starts playback from the previous position.
Press [MENU] button on Operational Panel to return
to the Main Menu.

Controlling the iPod/iPhone

iPod audio mode screen
13
14
15
1 2 3 5 6
4
1. [ ] Settings Button
Displays the Options screen. You can specify play
modes and other settings from this screen.
2. [ ] Previous Track Button
3. [ ] Repeat Button
Use to repeat the selected track.
Press once to start a single track repeat. Press again
to activate a repeat all. To turn repeat off, press same
button again. Repeat symbols are displayed in the info
window in the upper left area of the screen.
[ ]: All repeat.
[ ]:1-Track repeat.
[ ]: Repeat off.
4. [ ] Play/Pause Button
Use to control playback and pause.
(1). Touch the key during playback. Playback pauses.
(2). To resume playback touch the key again.
5. [ ] Shuffle Button
Use to switch the shuffle mode on or off. When
enabled, this function performs playback of tracks in
random order, regardless of the order in which they are
recorded.
[ ]: Shuffle Off.
[ ]: Song Shuffle.
12 11 10
8
7 8
NX501E/NZ501E 33