Nz501E Functions Of Buttons - Clarion NX501E Owner's Manual & Installation Manual

NZ501E Functions of Buttons

[microSD]
[OPEN]
[ISR/SEND]
[ ]
[ / ]
[-]
[+]
[IR]
Note: Be sure to read this chapter while referring to front
diagram "PANEL CONTROLS".
[MENU/PWR] Key
• Press this key to power on the system in power off
mode.
• Keep pressing this key more than 2 second to turn
off the system when system is in power on mode.
• Press this button to display main menu, press again
to return current source when system is in power on
mode.
[NAVI/AV] Button
• Press this button to enter navigation mode; press
again to return current source.
• Press and hold this button for 3 seconds to display
the brightness setting panel.
[ ] Eject
• Press to eject disc from unit.
[Microphone]
• Internal microphone for use during Bluetooth phone
calls. Sensitivity can be adjusted from the Settings
menu.
[RESET] Button
• Press this button to hardware reset the unit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[microSD]
• Insert a microSD in this.
Note: The microSD card is only for navigation. Please
don't remove it, otherwise, the navigation function will
be disabled.
[AUX IN]
AUX 1 Connector.
[BAND/END PS]
[NAVI/AV]
[Microphone]
[RESET]
[AUX IN]
[ ]
[ ]
[MENU/PWR]
NX501E/NZ501E 11