Trouble Shooting - Russell Hobbs RHGWC1B-C Instruction Manual

Trouble shooting

Problem Solution
Check that the appliance is switched on.
Check that there has not been a power cut.
Check that the plug is not faulty.
Check that the fuse has not blown.
The cooler doesn't work
Check that the voltage is correct for the appliance.
Are there any faults with the socket? For this purpose,
try the plug of your appliance by connecting it to a
socket which you are sure is working.
Check that the appliance is not overloaded
Check that the thermostat is set to a suitable
temperature.
Check that the appliance is not placed in direct
sunlight, or too near to a heating source.
The temperature inside the Check that the ambient temperature is within the
appliance is not cold enough operation limits of the appliance.
Are the doors of the appliance opened frequently?
Once the door is opened, the humidity found in the air
in the room enters the appliance, especially if the
humidity levels in the room are very high. The more
frequently the door is opened in humid conditions the
more chance of the build up of moisture.
Increase the working temperature by adjusting the
thermostat to a lower setting.
The highest setting should only be used as a rapid cool
The temperature within the
setting and should only be set 2 hours before a large
appliance is too cold
amount of food is placed in the cooler. If this is not
done the temperature in the cooler compartment
could fall below 0ºC as the compressor will run
continuously.
The inner surfaces of the Caused by condensation - dry the inside of the
appliance are wet appliance.
For Customer Services, Spare Parts & Warranty Information please call 0845 209 7461
r6.2
- 14 -