Lock & Keys (Selected Models) - Russell Hobbs RHGWC1B-C Instruction Manual

Lock & Keys (selected models)
Some models are provided with a lock and 2 keys. The lock will be on
•
the front of the unit/door at the bottom. The keys are packaged with
the instruction manual inside the appliance.
To lock the appliance insert 1 of the keys into the lock and turn it
•
clockwise until the metal pin is fully engaged and the door is locked.
Remove the key and place it in a secure place.
To unlock the appliance insert 1 of the keys in to the lock and turn the
•
key counter clockwise until the metal pin is fully released and the door
is unlocked. Remove the key and place it in a secure place.
If required the locking plate at the bottom of the unit (this is where the
•
locking pin locates when the unit is locked) can be adjusted. To do this
loosen the 2 screws, adjust the plate and retighten the screws. Check
the locking pin locates correctly.
Door Reversal
You will need to tilt the cooler backward to access the lower hinge which
holds screws. Do not tilt more than 45 degrees and do not lay the cooler flat
on its side.
Tools Required: Philip head screwdriver, flat headed screwdriver and
hexagonal spanner.
1. Remove the top plastic hinge cover and set aside, then unscrew the 4
screws from the metal bracket and set aside. Carefully remove the door
and place it on a cushioned surface.
For Customer Services, Spare Parts & Warranty Information please call 0845 209 7461
r6.2
- 10 -