Trouble Shooting - Russell Hobbs RHBI36DZWC2 Instruction Manual

Trouble shooting

Problem
The cooler doesn't work
Temperature inside the
appliance is too warm.
Temperature inside the
appliance is too cold
Solution
Check that the appliance is switched on.
Check that there has not been a power cut.
Check that the plug is not faulty.
Check that the fuse has not blown.
Check that the voltage is correct for the appliance.
Are there any faults with the socket? For this
purpose, try the plug of your appliance by connecting
it to a socket which you are sure is working.
The temperature controls are set too warm. Set the
temperature controls to a cooler setting and allow
several hours for the temperature to stabilise.
The door is being kept open too long or is being
opened too frequently, which is allowing warm air to
enter the appliance.
The door is not closed completely.
The door gasket is not sealing correctly.
The appliance has recently been disconnected from
the mains supply; it will take at least four hours for it
to get down to temperature again.
The temperature controls are set too cold. Set the
temperature controls to a warmer setting and allow
several hours for the temperature to stabilise.
23