Before Flying; Introduction; Charging The Aircraft Battery - Reely GeNii Mini RtF Quick Start Manual

7. Before flying

7.1 Introduction

This section assumes you will control the aircraft with the remote controller. The aircraft can also be controlled through
the mobile application (refer to the full operating instructions for details).
You can get the aircraft ready for flight in a few steps:
1. Charge the flight battery and the remote controller battery.
2. Install the flight battery.
3. Initialize the aircraft and run the self-inspection procedure.
4. Link the mobile app to the remote controller for displaying of real time flight data.

7.2 Charging the aircraft battery

WARNING
• Make sure you have read and understood the safety instructions related to batteries.
• Charge batteries in a well-ventilated environment and keep away from heat sources.
• Do not charge batteries next to flammable or on the surface of electro-conductive objects.
• Monitor batteries while they are charging.
1. Connect the USB charging cable to the flight battery charger.
2. Connect the end of the charging cable to a USB power supply. CAUTION! Do not charge on a computer USB
port.
3. Insert the aircraft battery into the charger as shown below.
Indications
Blinking green light (Insert a battery)
Blinking red light (Charging)
Solid green light (Battery fully charged)
27