Table of Contents
Advertisement
7.6
Meter reading by means of MultiPort 250D
Meter reading is effected either immediately after a scanning or from the menu Read Meter.
7.6.1
Meter reading after scanning
When the scanning has been
completed, select Read Meter using
the right function key to have the list
of meters found displayed. Select the
meter to be read using
When the meter has been read, the
first data appears in the display,
which also indicates the total number
of registers that can be read. The
example to the left displays registers
1 to 5 of a total of 50 registers.
Scroll using
and
.
When pressing
again, reading
data is displayed in detailed
resolution.
When reading MULTICAL®
meters, both M-Bus-specific and
manufacturer-specific data are
displayed by the master. Among
other things, software version and
module type are displayed.
From other meter types, M-Bus-
specific data is displayed.
Kamstrup A/S • 5512853_C1_GB_01.2017
and
.
Meter list from scanning with sec. addr.
The meter is being read.
Detailed temperature indication.
M-Bus Master MultiPort 250D
Meter list from scanning with prim.
addr.
The meter has been read.
Detailed module type indication.
31
Hide quick links:
Advertisement
Table of Contents
