Kamstrup M-Bus Master MultiPort 250D Installation And User Manual page 37

M-Bus Master MultiPort 250D
General Delay
General Delay before all actions during M-Bus scanning.
General Delay is per default 700 ms.
7.9 Green Mode
With the Green Mode function it is possible to switch off the power to all M-Bus slaves connected to the master. This
reduces the electricity consumption of the M-Bus network by up to 15 Watt.
Power is automatically switched on again when communication is detected on one of the communication ports as well
as when a front button is pressed.
If Green Mode is used in conjunction with a reading program, the program should be configured to send an initialisation
(SND_NKE) followed by a pause of one minute before reading is started with the M-Bus reading command (REQ_UD).
Green Mode Bus-Off Delay sets the
time the master waits to switch off
the M-Bus power after last detected
communication.
The Green Mode function can be
activated in masters with the serial
number 48255589 or higher.
7.10 Other settings
Backlight Mode
Select whether the display should be permanently lit or only when the master
is operated.
Clock Appearance
Select analog or digital display.
Kamstrup A/S • 5512853_C1_GB_01.2017 37