Table of Contents
Advertisement
M-Bus Master MultiPort 250D
Location
Shows where you are in a menu list, a meter list or a meter data list. Alternatively, it displays details of an ongoing
function, e.g. secondary scanning at 2400 baud.
Status
Indicates the status of the screen in question (refers to Title). It can, for example, indicate the number of slaves found
during scanning.
Notifier
Displays information on a recent event. It could, for example, be the number of a meter found during scanning.
Notifier can also be a shortcut key, e.g. a meter reading can be started using the right-hand function key.
7.4
Menu overview
The top menu shows time and date,
the configuration of the master as
master or repeater, and the number
of unit loads with which the meters
load the master. Typically the load of
one meter is 1 unit load.
If PIN code protection is on, a
padlock is displayed.
The main menu shows the different
menus available in the master.
7.5
Meter search by means of MultiPort 250D
Carrying out a meter search (scanning) by means of the master, you can choose primary or secondary scanning.
Available communication speeds are 300, 2400 or 9600 baud, and scanning can be carried out at all three speeds.
It appears from the top of the master's display whether scanning has been effected with primary or secondary
addressing, and also the selected speed is displayed.
At the bottom of the display, the number of meters found as well as the number of the last meter found is shown.
28
Status menu.
Main menu.
Kamstrup A/S • 5512853_C1_GB_01.2017
Hide quick links:
Advertisement
Table of Contents
