Tape Playback; Basic Operations - Aiwa NSX-HMA86 Operating Instructions Manual

TAPE PLAYBACK

BASIC OPERATIONS

• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/CrO
tapes for playback.
1 Press TAPE/DECK 1/2 and press PUSH EJECT z
to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press d to start play.
Selected deck number
Playback side indicator
c: The front side is being played (forward).
x: The back side is being played (reverse).
) or Type IV (metal)
2
The tape counter
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
To play one side only, select p.
To play from front side to reverse side once only, select [.
To play both sides repeatedly, select ].
• When tapes are loaded in both decks, [ on the display
indicates Continuous Play.
To select a playing deck
When tapes are loaded in both decks, press TAPE/DECK 1/2
first to select a deck.
The selected deck number is displayed.
To stop play, press s.
To pause play (deck 2 only), press a. To resume play, press
again.
To change the playback side, press d in play or pause mode.
To fast forward or rewind, press f or g. Then press s to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE/DECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press s CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
En
13
ENGLISH