sematic SDS DC-PVM Rel. 3.0 Manual page 6

Index
1 PREFACE
2 WHAT IS THE SEMATIC DRIVE SYSTEM
2.1 Speed profiles
3 GENERAL FEATURES
3.1 Technical information
3.2 Door Controller Sematic Drive System
4 SIGNALS TO/FROM THE DOOR CONTROLLER
4.1 Connections
4.1.1 Detector/Photocell/Barriers: Signal-Only Connection to the Door
Controller (Direct Connection)
4.1.2 Detector/Photocell/Barriers: Complete Connection to the Door Controller
5 INSTRUCTIONS WITHOUT HANDSET
Display in Automatic and Manual Mode
5.1 Automatic Mode "AUTO"
5.2 Manual Mode "MAN"
5.3 Programming Mode "PROG"
6 FUNCTIONS AVAILABLE
6.1 Reversing System Force Setting
6.2 Reversing System choice: INTERNAL or EXTERNAL
6.3 Limited Door Reversal
6.4 Main Lift Controller Test
6.4.1 Main Lift Controller Test (when moving) [default setting]
6.4.2 Main Lift Controller Test (when moving + parking)
6.4.3 No MLC Signal
6.4.3.1 Instant Stop
6.4.3.2 Low Speed to Stop
6.4.3.3 Low Speed Cycle
6.4.4 Main Lift Controller Input Alarm
6.5 Car Door Locking Device
6.6 Full or Framed Glazed Paneled Doors
6.7 Aux Output Relay
6.7.1 Space Percentage
6.7.2 Gong While Opening
6.8 Forced Closing [Nudging]
6.9 Fire Fighting
6.10 Double TB
6.11 EOD (Emergency Opening Device) and timeout
6.12 Protective Device Logic Kn
6.13 Motor Rotation During Closing
6.14 Alarms
7 TRIAL OPERATIONS BEFORE SETTING AT WORK
7.1 Self-learning cycle
© SEMATIC All rights reserved
Changes can be made without notice
see www.sematic.com for latest release
infosem@sematic.com
©
©
5
w w w . s e m a t i c . c o m
7
pag.
9
pag.
11
pag.
12
pag.
16
pag.
19
pag.
25
pag.