Appendix 2: Protocols; Adjustment Table - h/p/cosmos Robowalk expander F-M Original Directions For Use

13 Appendix 2: Protocols

13.1 Adjustment table

For a successful therapy it is necessary to get reproducible data of the patient's progress (or regress). Therefore the
h/p/cosmos robowalk
®
Use the following adjustment table from the first treatment on, to facilitate your daily work. Maybe the first settings will
cost some more time until you found the right parameters for each patient, but later on you will have the data on your
sheet and setting becomes much faster.
The adjustment table allows you to:
confer the settings from one day to the next.
-
confer the settings from one patient to the next.
-
document the training / therapy without interruption
-
In the following you will get an introduction in the way of documentation for the h/p/cosmos robowalk
by some examples.
1. Right ankle on expander 8, position 1, black expander. Pull out 7 is also on position 1 and increases the power
by pretension 2 (expander is pulled out until scale shows a pretension of 2, than it is fixed in the clam cleats).
2. Left ankle on expander 6, position 1, black expander. Pull out 5 is on position 2 to decline the pulling force.
3. The arrest elements are on position 0 at the moment.
4. Right upper leg on expander 3, position1, grey expander. Pull out 4 is on position 3 to decline the pulling force.
5. Left upper leg on expander 1, position 1, grey expander. Pull out 2 is on position 2 to decline the pulling force.
6. Paul Patient trained with a treadmill velocity of 2 km/h with 0% elevation for 10 minutes.
© 2014 h/p/cosmos sports & medical gmbh
expander allows you to note any parameter you set for your patient.
file: n:\article\cos30022man-en\20140206_cos30022man-en_h-p-cosmos_robowalk_expander_manual.doc
author: fh email@h-p-cosmos.com created 06.02.2014
appendix
expander system
®
printed 06.02.2014 page: 60 of 67