Service; Safety Notes, Warnings, Precautions - h/p/cosmos Robowalk expander F-M Original Directions For Use

7 Service

Some simple maintenance and monitoring (no repair work!), as described, can easily be done or even have to be done by
yourself. All kind of installation and repair work as well as most maintenance work is to be carried out only by trained and
authorized technicians who have been certified by h/p/cosmos. The following symbols will indicate which work can be done
by the customer and which work has to be done by authorized technicians:
The customer / user should perform this maintenance and monitoring work. Some safety checks or
monitoring (for examples of harnesses and ropes, running belt condition and position, etc.) have to be
performed on a daily basis. For this reason it is not practical to contract certified technicians for such tasks.
However, where it is practical, all maintenance and monitoring work marked with this symbol can also be
performed by certified technicians.
All installation, maintenance, repairs and monitoring work indicated with this symbol must only be
performed by trained, authorized technicians who have been certified by h/p/cosmos. Customers/users
must not perform these kinds of tasks.
We recommend calling our competent service team or entering into a maintenance contract for a routine service at an
interval of 6 or 12 months for standard machines and standard applications. A form for registration of your institution and
device is included in the delivery. In order to be able to supply you with the latest technical information and service, it is
important for you to fill out the form. Therefore please fill out the form for registration immediately and send it back.

7.1 Safety notes, warnings, precautions

7.1.1 Room conditions
h/p/cosmos devices must not be used outdoor and/or in environmental conditions other than those specified in the
N
chapter entitled „technical data" and "Environmental requirements".
The installation room has to meet the requirements of DIN and VDE installation directives.
N
Never install the device in a flammable or volatile location. This may cause explosion or fire.
N
Never install the device where acid or corrosive gases are present as current leakage or electric shock may result
N
due to corrosion.
7.1.2 Transport and Installation
The manufacturer does not assume liability for any damage, complaints or missing parts which are not reported
N
immediately upon delivery on the packing list/delivery note.
In order to ensure proper installation and safety, the manufacturer, an authorised service crew or an authorised
N
dealer must always transport and install the devices.
Failure to comply with the conditions listed in this operation and service manual and listed in the operation and
N
service manuals of other respective devices which may be used in connection with this device, failure of
performing recommended maintenance and safety inspection intervals, unauthorized maintenance or amendments
of the design and/or performance and/or specifications and/or labelling of the devices shall absolve h/p/cosmos
sports & medical gmbh from any responsibility for the safety, reliability and performance of this equipment.
All material and all other parts should be kept away from children and animals.
N
Do not modify the device and do not connect to other equipment which is not explicitly declared compatible by all
N
involved manufacturers.
Only connect accessories that are confirmed as compatible by all manufacturers.
N
If the device is to be stored unused in an unsupervised area for an extended period, ensure that children do not
N
have access.
Do not put packing plastic bags, plastic foils or other materials within reach of children as suffocation may result.
N
© 2014 h/p/cosmos sports & medical gmbh
file: n:\article\cos30022man-en\20140206_cos30022man-en_h-p-cosmos_robowalk_expander_manual.doc
author: fh email@h-p-cosmos.com created 06.02.2014 printed 06.02.2014 page: 20 of 67
service