Installation - h/p/cosmos Robowalk expander F-M Original Directions For Use

Table of Contents

Advertisement

8 Installation

8.1.1
Unpacking and packaging
When receiving the device in a crate or unpacked, make sure the device, the accessories and/or the packaging is not
damaged. If you discover any damage and/or missing parts make a note on the packing-list / delivery note of the carrier.
Inform h/p/cosmos and your dealer immediately in writing about any damage and/or missing parts.
The manufacturer does not assume liability for any damage, complaints or missing parts which are
not reported immediately upon delivery on the packing list/delivery note.
Before unpacking the machine and accessories, read the instructions on the crate. Pay special attention to small parts,
so that you do not dispose of them or any instructions with the packaging. Within Germany, most devices are delivered
and assembled by h/p/cosmos directly or by an authorised forwarder. If delivered by h/p/cosmos, the packaging will be
removed and recycled.
If the device is delivered by a carrier, you can recycle the packaging yourself or send it back to the manufacturer
(transportation to be paid by the customer).
8.1.2
Transport
The h/p/cosmos robowalk
h/p/cosmos treadmill (see shipment instruction in the treadmill manual).
Some of the components are heavy in weight!
Please notice that the installation must be done by h/p/cosmos authorized technicians.
8.1.3
Storage
Store the devices at a temperature of – 20° ... + 50° C.
8.1.4
Environmental requirements / room configuration
Running machines are not to be used in medically utilized rooms with a danger of explosions or in easily inflammable
atmospheres. The devices must not be installed near to e.g. an x-ray device, motors or transformers with high voltage
connection, as the electric and magnetic interference can falsify measurements or even render them impossible. High
voltage lines must be avoided nearby the device. h/p/cosmos electrical devices with mains connections must neither be
used in wet and humid areas (e.g. swimming pools, saunas, etc.) nor in environmental chambers. If not stated otherwise
in the delivery information, h/p/cosmos devices are designed for operation in normal climatic surroundings:
Temperature:
Relative humidity:
Air pressure:
Maximum operating altitude:
The device should be protected from high humidity.
© 2014 h/p/cosmos sports & medical gmbh
expander system is usually delivered in two h/p/cosmos standard boxes and with an
®
+ 10° ... + 40°C
30 ... 70 % (non condensing!)
700 ... 1060 mbar
approx. 10,000 feet (3000 m), without pressurization
file: n:\article\cos30022man-en\20140206_cos30022man-en_h-p-cosmos_robowalk_expander_manual.doc
author: fh
email@h-p-cosmos.com
safety, installation and commissioning
created 06.02.2014
printed 06.02.2014
page: 22 of 67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents