Ce Marking; Compliance With The European Low Voltage Directive; Compliance With The European Emc Directive; Ul Marking - ABB ACS880-604 Hardware Manual

66 Technical data

CE marking

A CE mark is attached to the brake chopper module to verify that the unit follows the
provisions of the European Low Voltage and EMC Directives.

Compliance with the European Low Voltage Directive

The compliance with the European Low Voltage Directive has been verified according to
standards EN 61800-5-1 and EN 60204-1.

Compliance with the European EMC Directive

ACS880 multidrive modules: The cabinet builder is in charge for the compliance of the
drive with the European EMC Directive. For information on the items to consider, see:
•
Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English])
•
Cabinet design and construction instructions for ACS880 multidrive modules
(3AUA0000107668 [English])
•
Technical guide 3: EMC Compliant Installation and Configuration for a Power
DriveSystem (3AFE61348280 [English]).

UL marking

The brake chopper module is cULus Listed with the rated voltages.
The cooling fans are cURus Recognized or cULus Listed.
The fuses are cURus Recognized.
The SAFUR brake resistors do not have UL certification.

More information on standards and markings

See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).